高级设置

-------------------------------------------------------------------------------
-- UltraDefrag configuration file
-------------------------------------------------------------------------------
-- This file contains all UltraDefrag settings. It controls behaviour
-- of the graphical interface, the automatic defragmentation module
-- and the boot time interface.
--
-- In most cases there's no need to edit this file manually as all the most
-- useful settings are easily configurable via the settings dialog of the
-- graphical interface.
--
-- This file is written in the Lua programming language. There's no need
-- to learn it thoroughly to edit this file, only basic knowledge is required.
-- To get an idea of how it works we do recommend you to read the official Lua
-- reference manual at https://www.lua.org/manual/5.1/
--
-- Also it's worth mentioning that you can use Unicode characters in strings
-- in this file as UltraDefrag uses an improved version of Lua which supports
-- them. All you have to do is to open this file in the Notepad++ editor and
-- then save it in UTF-8 (without BOM) encoding.
--
-- Also Notepad++ features syntax highlighting which makes it much easier
-- to edit the file. The latest version of Notepad++ can be downloaded
-- for free from http://www.notepad-plus-plus.org/
-------------------------------------------------------------------------------

-------------------------------------------------------------------------------
-- 1. Common options
-------------------------------------------------------------------------------
-- These options control behaviour of all the UltraDefrag interfaces
-- mentioned above.
-------------------------------------------------------------------------------

-------------------------------------------------------------------------------
-- A. Disk cleanup options
-------------------------------------------------------------------------------

-------------------------------------------------------------------------------
-- Set it to 1 (one) to remove temporary files before the disk processing.
-------------------------------------------------------------------------------

clean_temp_files = 1

-------------------------------------------------------------------------------
-- Temporary files expiration time.
-- Example:
--   temp_files_exp_time = "1h 30m"
-- Keep it empty ("") to use the default value of 24 hours or set to zero ("0")
-- to wipe out all the temporary files independent of their age.
-------------------------------------------------------------------------------

temp_files_exp_time = "24h"

-------------------------------------------------------------------------------
-- B. Defragmentation options
-------------------------------------------------------------------------------

-------------------------------------------------------------------------------
-- Set it to a value higher than 80 used by default to perform more thorough
-- defragmentation at a cost of additional processing steps and thus prolonged
-- overall disk processing time, or select a lower depth to shorten the disk
-- processing time at a cost of less thorough defragmentation.
--
-- Accepted values: 0 - 100
-------------------------------------------------------------------------------

defragmentation_depth = 80

-------------------------------------------------------------------------------
-- List of semicolon separated paths which have to be defragmented.
-- Examples:
--   in_filter = "*.jpg;*.png;*.gif" -- defragment pictures only
--   in_filter = "?:\\windows\\*"    -- defragment windows folders only
-- Keep it empty ("") or set to "*" to defragment everything.
-------------------------------------------------------------------------------

in_filter = ""

-------------------------------------------------------------------------------
-- List of semicolon separated paths which have to be skipped.
-- Examples:
--   ex_filter = "*temp*;*tmp*;*recycle*"      -- exclude temporary content
--   ex_filter = "*.avi;*.mkv;*\\video_ts\\*"  -- exclude movies
-------------------------------------------------------------------------------

ex_filter = "*system volume information*;*temp*;*tmp*;*recycle*;*dllcache*;*ServicePackFiles*;*Windows.old*;*.log;*\\Windows\\servicing\\*"

-------------------------------------------------------------------------------
-- Popular patterns intended for inclusion in filters.
-- For more extensions visit http://www.fileinfo.com/
-------------------------------------------------------------------------------

archive_patterns = "*.7z;*.7z.*;*.arj;*.bkf;*.bz2;*.bzip2;*.cab;*.cpio;*.deb;*.dmg;*.gz;*.gzip;*.lha;*.lzh;*.lzma;*.rar;*.rpm;*.swm;*.tar;*.taz;*.tbz;*.tbz2;*.tgz;*.tpz;*.txz;*.xar;*.xz;*.z;*.zip"
audio_patterns = "*.aif;*.cda;*.flac;*.iff;*.kpl;*.m3u;*.m4a;*.mid;*.mp3;*.mpa;*.ra;*.wav;*.wma"
video_patterns = "*.3g2;*.3gp;*.asf;*.asx;*.avi;*.flv;*.mov;*.mp4;*.mpg;*.rm;*.srt;*.swf;*.vob;*.wmv"
disk_image_patterns = "*.fat;*.hdd;*.hfs;*.img;*.iso;*.ntfs;*.squashfs;*.vdi;*.vhd;*.vmdk;*.wim"

-------------------------------------------------------------------------------
-- Set these variables to 1 to include patterns defined above to in_filter.
-------------------------------------------------------------------------------

include_archive = 0
include_audio = 0
include_video = 0
include_disk_image = 0

-------------------------------------------------------------------------------
-- Set these variables to 1 to include patterns defined above to ex_filter.
-- By default all the variables are set to 1 because archives, multimedia
-- files and virtual machines rarely benefit from defragmentation.
-------------------------------------------------------------------------------

exclude_archive = 1
exclude_audio = 1
exclude_video = 1
exclude_disk_image = 1

-------------------------------------------------------------------------------
-- Skip fragments bigger than specified.
-- Example:
--   fragment_size_threshold = "20 MB"
-- Set it to an empty string ("") or zero ("0") to process fragments
-- of all sizes.
-------------------------------------------------------------------------------

fragment_size_threshold = "20 MB"

-------------------------------------------------------------------------------
-- Skip files bigger than specified.
-- Example:
--   file_size_threshold = "100 MB"
-- Keep it empty ("") to defragment files of all sizes.
-------------------------------------------------------------------------------

file_size_threshold = ""

-------------------------------------------------------------------------------
-- Skip files having less fragments than specified.
-- Example:
--   fragments_threshold = 5 -- skip files having less than 5 fragments
-- Set this parameter to zero to defragment files regardless of their
-- number of fragments.
-------------------------------------------------------------------------------

fragments_threshold = 0

-------------------------------------------------------------------------------
-- During SSD defragmentation skip files having less fragments than specified.
-- Example:
--   ssd_fragments_threshold = 20 -- skip files having less than 20 fragments
-- Set this parameter to zero to defragment files regardless of their
-- number of fragments.
-------------------------------------------------------------------------------

ssd_fragments_threshold = 20

-------------------------------------------------------------------------------
-- C. Optimization options
-------------------------------------------------------------------------------

-------------------------------------------------------------------------------
-- Set it to a value higher than 80 used by default to perform more thorough
-- quick optimization at a cost of additional processing steps and thus prolonged
-- overall disk processing time, or select a lower depth to shorten the disk
-- processing time at a cost of less thorough quick optimization.
--
-- Accepted values: 0 - 100
-------------------------------------------------------------------------------

quick_optimization_depth = 80

-------------------------------------------------------------------------------
-- Set it to a value higher than 80 used by default to perform more thorough
-- full optimization at a cost of additional processing steps and thus prolonged
-- overall disk processing time, or select a lower depth to shorten the disk
-- processing time at a cost of less thorough full optimization.
--
-- Accepted values: 0 - 100
-------------------------------------------------------------------------------

optimization_depth = 80

-------------------------------------------------------------------------------
-- File sorting criteria. Available options are: PATH (sort files by path),
-- SIZE (sort files by size), C_TIME (sort files by the creation time),
-- M_TIME (sort files by the last modification time) and A_TIME (sort files
-- by the last access time).
-- Example:
--   file_sorting_criteria = "PATH" -- sort files by path
-------------------------------------------------------------------------------

file_sorting_criteria = "PATH"

-------------------------------------------------------------------------------
-- File sorting order. Available options are: ASC (ascending) and DESC
-- (descending).
-- Example:
--   file_sorting_order = "ASC" -- sort files in ascending order
-------------------------------------------------------------------------------

file_sorting_order = "ASC"

-------------------------------------------------------------------------------
-- List of semicolon separated paths of files to place to the very
-- beginning of the disk (the fastest disk tracks) regardless
-- of the sorting criteria and order.
--
-- By default Windows boot, hibernation and paging files are selected.
-- This results in faster boot times, a quicker wake-up from hibernation
-- and smoother multitasking.
--
-- Feel free to add your favorite apps here to speed them up as well.
-------------------------------------------------------------------------------

high_priority_files = "C:\\Windows\\system32\\ntoskrnl.exe;C:\\Windows\\system32\\bootvid.dll;C:\\Windows\\system32\\hal.dll;C:\\Windows\\system32\\*.nls;C:\\Windows\\system32\\config\\SYSTEM;C:\\Windows\\system32\\drivers\\*;C:\\hiberfil.sys;C:\\pagefile.sys"

-------------------------------------------------------------------------------
-- Exclude files larger than specified (except high-priority ones) from sorting.
-- Example:
--   optimizer_file_size_threshold = "20 MB"
-- Keep it empty ("") to sort out files of all sizes. Though, we do recommend
-- to use the default value ("20 MB") as sorting of big files doesn't affect
-- system performance and just wastes time. Also keep in mind that UltraDefrag
-- needs larger free space gaps to sort out larger files, so in case they are
-- not available on the disk, large files won't get sorted out no matter what
-- value is set for this option.
-------------------------------------------------------------------------------

optimizer_file_size_threshold = "20 MB"

-------------------------------------------------------------------------------
-- If this option is set to 1 then during SSD optimization
-- UltraDefrag will defragment and trim the disk only.
-------------------------------------------------------------------------------

ssd_defragment_and_trim_only = 1

-------------------------------------------------------------------------------
-- D. Miscellaneous options
-------------------------------------------------------------------------------

-------------------------------------------------------------------------------
-- Set this option to 1 to ignore all the filters set above.
-------------------------------------------------------------------------------

deep_action = 0

-------------------------------------------------------------------------------
-- Skip disks entirely when their fragmentation level is below than specified.
-- Example:
--   fragmentation_threshold = 10 -- ignore fragmentation level below 10%
-- Set it to zero (0) to process disks regardless of their fragmentation level.
-- Note: this parameter doesn't affect the MFT optimization task.
-------------------------------------------------------------------------------

fragmentation_threshold = 0

-------------------------------------------------------------------------------
-- Move files in chunks of the specified size. Select a smaller value to get
-- smoother progress updates and improve responsiveness of all UltraDefrag
-- interfaces or a higher value to increase the disk processing speed.
-- The default value is "8 MB".
-- Example:
--   file_chunk_size = "32 MB"
-- If it is set to an empty string (""), UltraDefrag uses the default value.
-------------------------------------------------------------------------------

file_chunk_size = "8 MB"

-------------------------------------------------------------------------------
-- Terminate the job when the specified time interval elapses.
-- Example:
--   time_limit = "6h 30m"
-- Keep it empty ("") or set to zero ("0") to let the job complete
-- no matter how long will it take.
-------------------------------------------------------------------------------

time_limit = ""

-------------------------------------------------------------------------------
-- The progress refresh interval, in milliseconds. The default value is 100.
-------------------------------------------------------------------------------

refresh_interval = 100

-------------------------------------------------------------------------------
-- Set it to 1 (one) to disable generation of the file fragmentation reports.
-------------------------------------------------------------------------------

disable_reports = 0

-------------------------------------------------------------------------------
-- Set it to 1 to simulate the disk processing. No files will get moved
-- physically, but you'll be able to quickly check how various disk
-- processing algorithms work.
-------------------------------------------------------------------------------

dry_run = 0

-------------------------------------------------------------------------------
-- Set it to DETAILED for troubleshooting, otherwise keep it empty ("")
-- or set to NORMAL. Note that the detailed logging consumes more time,
-- memory and disk space. Also you may set this option to PARANOID, but
-- keep in mind that the paranoid level generates much more debugging
-- output and may slow down the disk processing significantly.
-------------------------------------------------------------------------------

dbgprint_level = "NORMAL"

-------------------------------------------------------------------------------
-- Set it to redirect debugging output to a log file. Keep it
-- empty ("") if everything works fine and no logging is needed.
-- Examples:
--   log_file_path = "C:\\Windows\\UltraDefrag\\logs\\ultradefrag.log"
--   log_file_path = ".\\logs\\ultradefrag.log"
-- Environment variables can be used as shown below:
--   log_file_path = os.getenv("TEMP") .. "\\UltraDefrag_Logs\\ultradefrag.log"
-- Note:
--   Unicode characters cannot be included into the log file path.
-------------------------------------------------------------------------------

log_file_path = ".\\logs\\ultradefrag.log"

-------------------------------------------------------------------------------
-- 2. Graphical interface options
-------------------------------------------------------------------------------
-- These options control look and feel of the graphical interface.
-------------------------------------------------------------------------------

-------------------------------------------------------------------------------
-- Set it to 1 to minimize the application's window
-- to the taskbar notification area (system tray).
-------------------------------------------------------------------------------

minimize_to_system_tray = 0

-------------------------------------------------------------------------------
-- Size of the cluster map cells, in pixels. The default value is 4.
-------------------------------------------------------------------------------

map_block_size = 4

-------------------------------------------------------------------------------
-- Width of the grid line, in pixels. The default value is 1.
-------------------------------------------------------------------------------

grid_line_width = 1

-------------------------------------------------------------------------------
-- Cluster map colors.
-------------------------------------------------------------------------------

directories_color = "#fcd34d"
solid_files_color = "#0000ff"
fragmented_files_color = "#ff0000"
locked_files_color = "#00d720"
mft_color = "#800080"
mft_zone_color = "#d300ff"
free_space_color = "#ffffff"
grid_color = "#222222"

-------------------------------------------------------------------------------
-- The shutdown confirmation timeout, in seconds. The default value
-- is 60, set it to zero to skip any confirmation. Note: it works
-- the same way when you confirm hibernation, logoff or reboot.
-------------------------------------------------------------------------------

seconds_for_shutdown_rejection = 60

-------------------------------------------------------------------------------
-- 3. Automatic defragmentation options
-------------------------------------------------------------------------------
-- These options control automatic defragmentation. Don't modify them
-- directly, open the Settings dialog in UltraDefrag GUI instead,
-- adjust automatic defragmentation options there and then click OK.
-- The program will save the options and generate the auto-defrag.cmd
-- script taking them all into account.
-------------------------------------------------------------------------------

-------------------------------------------------------------------------------
-- Being set to 1 this option enables automatic defragmentation.
-------------------------------------------------------------------------------

auto_defrag_enabled = 1

-------------------------------------------------------------------------------
-- List of drives to defragment automatically.
-------------------------------------------------------------------------------

auto_defrag_drives_list = "C"

-------------------------------------------------------------------------------
-- Being set to 1 this option forces the automatic defragmentation module
-- to use the custom script.
-------------------------------------------------------------------------------

auto_defrag_use_custom_script = 0

-------------------------------------------------------------------------------
-- 4. File fragmentation reports options
-------------------------------------------------------------------------------
-- These options define what happens when you open a file fragmentation
-- report, either from the graphical interface or from Windows Explorer.
-------------------------------------------------------------------------------

-------------------------------------------------------------------------------
-- Set it to zero to disable HTML reports generation.
-------------------------------------------------------------------------------

produce_html_report = 1

-------------------------------------------------------------------------------
-- Set it to 1 to enable generation of plain text reports.
-------------------------------------------------------------------------------

produce_plain_text_report = 0

-------------------------------------------------------------------------------
-- To adjust style of HTML reports edit the following file:
-- {installation folder}\scripts\udreport.css
-------------------------------------------------------------------------------

-------------------------------------------------------------------------------
-- this number helps to upgrade configuration file correctly, don't change it
-------------------------------------------------------------------------------

version = 331

-------------------------------------------------------------------------------
-- this code concatenates filter variables, don't modify it
-------------------------------------------------------------------------------

orig_ex_filter = ex_filter
if exclude_archive ~= 0 then ex_filter = ex_filter .. ";" .. archive_patterns end
if exclude_audio ~= 0 then ex_filter = ex_filter .. ";" .. audio_patterns end
if exclude_disk_image ~= 0 then ex_filter = ex_filter .. ";" .. disk_image_patterns end
if exclude_video ~= 0 then ex_filter = ex_filter .. ";" .. video_patterns end

orig_in_filter = in_filter
if include_archive ~= 0 then in_filter = in_filter .. ";" .. archive_patterns end
if include_audio ~= 0 then in_filter = in_filter .. ";" .. audio_patterns end
if include_disk_image ~= 0 then in_filter = in_filter .. ";" .. disk_image_patterns end
if include_video ~= 0 then in_filter = in_filter .. ";" .. video_patterns end

-------------------------------------------------------------------------------
-- this code sets environment variables for UltraDefrag, don't modify it
-------------------------------------------------------------------------------

-- common variables
os.setenv("UD_ORIG_IN_FILTER",orig_in_filter)
os.setenv("UD_ORIG_EX_FILTER",orig_ex_filter)
os.setenv("UD_EXCLUDE_ARCHIVES",exclude_archive)
os.setenv("UD_EXCLUDE_AUDIO",exclude_audio)
os.setenv("UD_EXCLUDE_VIDEO",exclude_video)
os.setenv("UD_EXCLUDE_DISK_IMAGES",exclude_disk_image)
os.setenv("UD_CLEAN_TEMP_FILES",clean_temp_files)
os.setenv("UD_TEMP_FILES_EXP_TIME",temp_files_exp_time)
os.setenv("UD_DEFRAGMENTATION_DEPTH",defragmentation_depth)
os.setenv("UD_QUICK_OPTIMIZATION_DEPTH",quick_optimization_depth)
os.setenv("UD_OPTIMIZATION_DEPTH",optimization_depth)
os.setenv("UD_IN_FILTER",in_filter)
os.setenv("UD_EX_FILTER",ex_filter)
os.setenv("UD_FRAGMENT_SIZE_THRESHOLD",fragment_size_threshold)
os.setenv("UD_FILE_SIZE_THRESHOLD",file_size_threshold)
os.setenv("UD_FRAGMENTS_THRESHOLD",fragments_threshold)
os.setenv("UD_SSD_FRAGMENTS_THRESHOLD",ssd_fragments_threshold)
os.setenv("UD_SORTING",file_sorting_criteria)
os.setenv("UD_SORTING_ORDER",file_sorting_order)
os.setenv("UD_HIGH_PRIORITY_FILES",high_priority_files)
os.setenv("UD_OPTIMIZER_FILE_SIZE_THRESHOLD",optimizer_file_size_threshold)
os.setenv("UD_SSD_DEFRAGMENT_AND_TRIM_ONLY",ssd_defragment_and_trim_only)
os.setenv("UD_DEEP_ACTION",deep_action)
os.setenv("UD_FRAGMENTATION_THRESHOLD",fragmentation_threshold)
os.setenv("UD_FILE_CHUNK_SIZE",file_chunk_size)
os.setenv("UD_TIME_LIMIT",time_limit)
os.setenv("UD_REFRESH_INTERVAL",refresh_interval)
os.setenv("UD_DISABLE_REPORTS",disable_reports)
os.setenv("UD_DBGPRINT_LEVEL",dbgprint_level)
os.setenv("UD_LOG_FILE_PATH",log_file_path)
os.setenv("UD_DRY_RUN",dry_run)

-- GUI specific variables
os.setenv("UD_SECONDS_FOR_SHUTDOWN_REJECTION",seconds_for_shutdown_rejection)
os.setenv("UD_MINIMIZE_TO_SYSTEM_TRAY",minimize_to_system_tray)
os.setenv("UD_MAP_BLOCK_SIZE",map_block_size)
os.setenv("UD_GRID_LINE_WIDTH",grid_line_width)

os.setenv("UD_DIRECTORIES_COLOR",directories_color)
os.setenv("UD_SOLID_FILES_COLOR",solid_files_color)
os.setenv("UD_FRAGMENTED_FILES_COLOR",fragmented_files_color)
os.setenv("UD_LOCKED_FILES_COLOR",locked_files_color)
os.setenv("UD_MFT_COLOR",mft_color)
os.setenv("UD_MFT_ZONE_COLOR",mft_zone_color)
os.setenv("UD_FREE_SPACE_COLOR",free_space_color)
os.setenv("UD_GRID_COLOR",grid_color)

-- automatic defragmentation specific variables
os.setenv("UD_AUTO_DEFRAG_ENABLED",auto_defrag_enabled)
os.setenv("UD_AUTO_DEFRAG_DRIVES_LIST",auto_defrag_drives_list)
os.setenv("UD_AUTO_DEFRAG_USE_CUSTOM_SCRIPT",auto_defrag_use_custom_script)

-------------------------------------------------------------------------------
-- END OF FILE
-------------------------------------------------------------------------------